Large Format Industrial 3D Printer


Built to handle standard materials like ABS, as well as more advanced materials like polycarbonate and nylon, the Funmat Pro can make a variety of different projects using its heated chamber, designed to prevent warping or curling. This large-volume 3D printer features a 280°C extruder, a temperature-controlled 60°C chamber, a 120°C buildplate, and a build volume of 1.5 x 1.5 x 2 ft (450 x 450 x 600mm) -- all on a set of wheels for ease of mobility in the workplace!


Every INTAMSYS Funmat Pro model comes with failsafe features such as Power Failure Recovery, which can pause and resume prints in the event of a blackout or brownout, and Filament Absence Warnings which notifies you to replace your filament. 


Not only are our printers programmed to protect your prints, but they also are capable of dimensional accuracy up to 12.5 microns. All of the Funmat Pro’s features are wrapped around a sleek, all-metal enclosure that provides insulation and protection for your products on the inside.

> 280°C Extruder

> 120°C Buildplate

> 60ºC Chamber

Designed For


Build Volume:

450 x 450 x 600 mm

Filament Absent Warning

When filament is getting low, a sensor triggers an alarm, and allows you to add new material. Never worry about running out of filament again!

Universal Power Supply Backup

Never lose a print due to power failure -- each machine has a built-in battery backup system, and the machine will automatically pause and shut down if the power is interrupted. When the power comes back on, it will resume printing.


Built-in Camera

Monitor your prints remotely with through a mobile app


Accurate to 12.5 Microns

Cutting-edge motors and drivers enable extremely high precision, resulting in incredible print quality, up to 12.5 microns



Printer profiles are pre-configured in the software for easy operation, straight out of the box

INTAMSYS Slicing Engine

INTAMSUITE is our proprietary slicing software, developed in-house, designed specifically for our machines.


Compatible with Industry-Standard Slicing Software

More option than INTAMSUITE? You can also use Simplify3D, Cura, Slic3r, and other slicer software


Printing Technology


Build Volume


Build Platform Material


Layer Resolution



Filament Diameter

Nozzle Diameter

Position Accuracy


 Fused Filament Fabrication, or Fused Deposition Modeling (FFF, FDM)

450 x 450 x 600mm

17.7" x 17.7" x 23.6"

Aluminum Plate + High Borosilicate Glass

Printing: 30~300mm/s

(print speed depending on material)


0.4mm Universal M6x1 Threading

X/Y axis: 18.75μm  Z axis: 1.56μm


Extruder Temperature

Build Plate Temperature

Chamber Temperature

Input File Type

Power Consumption



280°C (536°F)

120°C (248°F)

60°C (140°F)


220V, 30A breaker

Any 1.75mm Filament, including: PA/CF, PC, PC Alloys, PA, ABS, Carbon Fiber-Filled, Metal-Filled, Fiberglass-Filled, Nylon, ASA, PETG, ESD-Safe, HIPS, TPU, PLA, PVA, Open Material System

One Year Manufacturers Warranty, except on consumables

Digital Inkjet Printing Solution

SwissQprint  |  Mutoh  |  Printing SoftwareFinishing Solution  |  Inkjet Materials  |  Inks

Additive 3D Printing Solution

EnvisionTEC  |  PhotoCentric  |  Intamsys  |  BigRep

  • Facebook Clean
  • LinkedIn Clean
  • Google+ Clean

Copyright © 2018 Advance Image Technologies (M) Sdn Bhd. All Rights Reserved. All brand names & trademarks mentioned on this site are the property of their respective owners.