FUNMAT HT Enhanced
PRINT PEEK & ULTEM™
STRAIGHT OUT OF THE BOX
The Intamsys Funmat HT Enhanced is designed specifically to 3D print high-performance functional materials like PEEK, PEI and PPSU, in addition to a broad range of engineering thermoplastics.
Users can achieve 50-micron, high-resolution, industrial-quality 3D printing with the Intamsys Funmat HT.
> 450°C Extruder
> 160°C Buildplate
> 90ºC Chamber
260 x 260 x 260 mm
The Enhanced version includes a new build platform, ceramic-glass build plates, updated extruder design, auto bed-leveling, independent motor drivers, and more.
Filament Absent Warning
When filament is getting low, a sensor triggers an alarm, and allows you to add new material. Never worry about running out of filament again!
Power surges and failures? The Funmat HT has it's own battery backup to pause prints, and resume when the power returns. Essential when you're running important projects, or expensive filaments.
Auto Bed Leveling
Bed leveling is easier than ever, with a new 3-point automatic leveling system. You can also manually level as before, if needed.
Accurate to 12.5 Microns
Cutting-edge motors and drivers enable extremely high precision, resulting in incredible print quality, up to 12.5 microns
Pre-Configured Slicer from INTAMSYS
Printer profiles are pre-configured in the INTAMSUITE software for easy operation, straight out of the box
Compatible with Industry-Standard Slicing Software
More option than INTAMSUITE? You can also use Simplify3D, Cura, Slic3r, and other slicer software
Build Platform Material
Build Plate Leveling
Fused Filament Fabrication, or Fused Deposition Modeling (FFF, FDM)
260 x 260 x 260mm
10.2" x 10.2" x 10.2"
3-Point Automatic Leveling,
0.05-0.3mm, 50 Micron
100-200 Micron Standard
Printing: Avg ~100mm/s
Standard 1.75mm Filament
Open Material System
Universal M6x1 Threading
12.5 Microns X/Y
50 Microns (minimium layer height)
Build Plate Temperature
Input File Type
Shipping Weight &
Standard G-code, Marlin based
1200W, 110V, 10A breaker minimum.
L 35 W 26 H 31 (inches)
Any 1.75mm Filament, including: PEEK, PEI, PEI Blends, PPSU, PA/CF, PC, PC Alloys, PA, ABS, Carbon Fiber-Filled, Metal-Filled, Fiberglass-Filled, Nylon, ASA, PETG, ESD-Safe, HIPS, TPU, PLA, PVA, Open Material System
One Year Manufacturers Warranty, except on consumables